If you have further questions about this article, contact Dell Technical Support.The Audio Authority ® 1800 Sound Bar Demonstrator combines soundbar switching, volume control, and lighting into one compact system. Increase the volume of the audio source.Clear any obstructions between the soundbar yourself.Set all Windows audio balance controls (L R) to their midpoints.Confirm that the audio line in plug is inserted into the jack of the sound card or audio source.Sound from only one side of the soundbar. Confirm that the audio line in plug is inserted into the jack of the audio source.Ensure that no loose objects are touching the soundbar.Ensure that the soundbar is seated properly on the monitor.Test the soundbar using another audio source.Troubleshoot the computer's sound card.Turn the volume level to lower setting by turning the volume knob counter clockwise on the soundbar.Decrease the volume of the audio source.Set all Windows volume controls to their midpoints.Confirm that the audio line in plug is inserted into the jack of the sound card.Clear any obstructions between the soundbar and yourself.System's sound card is used as the audio source. Try different ports, reinstall the audio drivers, or restart the computer. Ensure that the computer built in audio or the sound card is enabled. Go to the control panel of the computer and click on Sound.Test the soundbar with a different audio source.Clean and reseat the audio line in plug.Turn the volume to a higher level by turning the volume knob clockwise on the soundbar.Set all Windows volume controls to their maximum.Plug the audio line in cable into the computer's audio out jack.Soundbar has power, and the power light is on. The power adapter is plugged into a known good electrical outlet. Confirm that the power cable from the soundbar is plugged into the power adapter.Check if the power light (white LED) on the front of the soundbar is illuminated. Turn the power to On, on the soundbar.No power to the soundbar and the power light is off. The following information can be used to troubleshoot various issues with the AX510 and AX510PA soundbar. Connect the AC adapter to your soundbar ( Figure 5).Connect the audio in cable from the soundbar to your computer ( Figure 4). Slide in the direction of the arrows until a click is heard ( Figure 3). Attach the soundbar to the monitor by placing the corresponding notches on the soundbar and the monitor (as shown by the arrows).The following instructions can be used to install the soundbar on a Dell compatible monitor. Note: If you have a monitor not on this list, you can check the monitor's User Guide for compatibility with the soundbar. The AX510 and AX510PA soundbars can be installed on the following monitors: Speaker Stand alone power adapter ( AX510PA only) A paired AC adapter is provided to power the soundbar ( Figure 2).ĪX510 and AX510PA soundbar technical information: Feature AX510PA (With a Power Adapter): For monitors that do not have a DC out port connection.AX510 (Without a Power Adapter): For monitors that can power the soundbar directly by a DC out port connection on the monitor ( Figure 1).There are two variants of the AX510 soundbar: The Dell AX510 and AX510PA are soundbars that attach to the bottom of certain Dell monitors. Note: More detailed information can be found in the soundbar User Guide: Dell AX510 and AX510PA User Guide
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |